RESEARCH ON THE QUALITY OF PROCESSING WITH A HORIZONTAL BANDSAW

Authors

  • Valentin Atanasov Author
  • Marian Todorov Author
  • Vladimir Spasov Author

Keywords:

horizontal bandsaw, logs cutting, surface roughness, quality of processing

Abstract

Experimental studies related to the influence of some factors on the quality of the resulting lumber were carried out. The venue of the research is the manufacturing conditions in Experimental and Training Forest Ranges in Barziya. As a work station a horizontal bandsaw for logs Arsov 90 Ltd. (Bulgaria) was used. The results were analyzed and compared to some earlier obtained with other machines of this type. They show that it is not advisable feed speed to exceed 16 m.min-1– due to the risk of unacceptable size deviations. Some recommendations for a more efficient usage of this type machines were proposed.

Downloads

Published

2018-05-20

Versions

Issue

Vol. 7 No. 1 (2018): INNOVATION IN WOODWORKING INDUSTRY AND ENGINEERING DESIGN 1/2018

Section

Woodworking Machines and Equipment

License

Copyright (c) 2018 Valentin Atanasov, Marian Todorov, Vladimir Spasov (Author)

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

How to Cite

(1)
Atanasov, V.; Todorov, M.; Spasov, V. RESEARCH ON THE QUALITY OF PROCESSING WITH A HORIZONTAL BANDSAW. INNO 2018, 7 (1).

Similar Articles

1-10 of 155

You may also start an advanced similarity search for this article.