This is an outdated version published on 2026-01-30. Read the most recent version.

RESEARCH ON THE QUALITY OF PROCESSING WITH A HORIZONTAL BANDSAW

Authors

  • Valentin Atanasov Author
  • Marian Todorov Author
  • Vladimir Spasov Author

Keywords:

horizontal bandsaw, logs cutting, surface roughness, quality of processing

Abstract

Experimental studies related to the influence of some factors on the quality of the resulting lumber were carried out. The venue of the research is the manufacturing conditions in Experimental and Training Forest Ranges in Barziya. As a work station a horizontal bandsaw for logs Arsov 90 Ltd. (Bulgaria) was used. The results were analyzed and compared to some earlier obtained with other machines of this type. They show that it is not advisable feed speed to exceed 16 m.min-1– due to the risk of unacceptable size deviations. Some recommendations for a more efficient usage of this type machines were proposed.

Downloads

Published

2018-05-20 — Updated on 2026-01-30

Versions

Issue

Vol. 7 No. 1 (2018): INNOVATION IN WOODWORKING INDUSTRY AND ENGINEERING DESIGN 1/2018

Section

Woodworking Machines and Equipment

How to Cite

(1)
Atanasov, V.; Todorov, M.; Spasov, V. RESEARCH ON THE QUALITY OF PROCESSING WITH A HORIZONTAL BANDSAW. INNO 2026, 7 (1).

Similar Articles

1-10 of 155

You may also start an advanced similarity search for this article.

Most read articles by the same author(s)

1 2 > >>