USING THE MORPHOMETRIC CHARACTERISTICS OF WOOD RAW MATERIALS IN THE SAWMILL TECHNOLOGY

Authors

Valentin Shalaev Author
Stanislav Rykunin Author

Keywords:

morphometric characteristics, wood raw materials, sawmill technology

Abstract

The opportunities of use of uneven distribution of knots in wood raw material are considered at cutting lumber on sawn blanks.

Downloads

PDF

Published

2013-12-15

Versions

2013-12-15 (2)
2026-01-30 (1)

Issue

Vol. 2 No. 2 (2013): INNOVATION IN WOODWORKING INDUSTRY AND ENGINEERING DESIGN 2/2013

Section

Biocomposite Technologies, Furniture Manufacturing and Design

License

Copyright (c) 2013 Valentin Shalaev, Stanislav Rykunin (Author)

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

How to Cite

(1)

Shalaev, V.; Rykunin, S. USING THE MORPHOMETRIC CHARACTERISTICS OF WOOD RAW MATERIALS IN THE SAWMILL TECHNOLOGY. INNO 2013, 2 (2).

Download Citation

Similar Articles

Julia Mihajlova, Viktor Savov, SUNFLOWER STALKS AND LIGNOSULFONATE – ALTERNATIVE RAW MATERIALS FOR THE PRODUCTION OF ECO-FRIENDLY MEDIUM DENSITY FIBREBOARDS , Innovation in Woodworking Industry and Engineering design: Vol. 12 No. 1 (2023): INNOVATION IN WOODWORKING INDUSTRY AND ENGINEERING DESIGN 1/2023
Neno Trichkov, Daniel Koynov, Cvetelin Ranov, QUALITY CHARACTERISTICS OF DOUGLAS FIR STEMS (Pseudotsuga menziesii) FOR THE PRODUCTION OF MASSIVE WOOD MATERIALS , Innovation in Woodworking Industry and Engineering design: Vol. 7 No. 1 (2018): INNOVATION IN WOODWORKING INDUSTRY AND ENGINEERING DESIGN 1/2018
Daniel Koynov, QUANTITATIVE YIELDSFROM THE CUTTING OF THE STEMS OF WHITE PINE (PINUS SYLVESTRIS L.), DEPENDING ON THE THICKNESS AND LENGTH OF THE DETAILS AND THEDEFCTS OF THE WOOD , Innovation in Woodworking Industry and Engineering design: Vol. 5 No. 1 (2016): INNOVATION IN WOODWORKING INDUSTRY AND ENGINEERING DESIGN 1/2016
Ana Marija Stamenkoska, ANALYSIS OF DIAMETER TAPER IN FIR (ABIES ALBA Mill.) AND SPRUCE (PICEA ABIES L.) SAWLOGS FROM 1ST AND 2ND QUALITY CLASS , Innovation in Woodworking Industry and Engineering design: Vol. 14 No. 1 (2025): INNOVATION IN WOODWORKING INDUSTRY AND ENGINEERING DESIGN 1/2025
Neno Trichkov, Daniela Koynov, QUANTITATIVE YIELD IN SAWING THIN LOGS OF SCOTS PINE (PINUS SYLVESTRIS L.) FOR PRODUCTION OF DIMENSIONAL LUMBER WITHOUT DEFECTS , Innovation in Woodworking Industry and Engineering design: Vol. 7 No. 2 (2018): INNOVATION IN WOODWORKING INDUSTRY AND ENGINEERING DESIGN 2/2018
Meysam Nazari, Mohamed Jebrane, Nasko Terziev, WOOD-BASED BUILDING MATERIALS WITH A THERMAL ENERGY STORAGE FUNCTION , Innovation in Woodworking Industry and Engineering design: Vol. 14 No. 1 (2025): INNOVATION IN WOODWORKING INDUSTRY AND ENGINEERING DESIGN 1/2025
Nikolai Bardarov, Nicole Christoff, Vladislav Todorov, Petar Antov, Mariana Kaludova, ANALYSIS OF ANATOMICAL ELEMENTS AS WOOD TEXTURE CHARACTERISTICS , Innovation in Woodworking Industry and Engineering design: Vol. 10 No. 2 (2021): INNOVATION IN WOODWORKING INDUSTRY AND ENGINEERING DESIGN 2/2021
Neno Trichkov, Daniel Koynov, CHARACTERISTICS OF THE TRUNKS OF SCOTS PINE (PINUS SYLVESTRIS) FOR PRODUCTION OF SOLID WOOD MATERIALS , Innovation in Woodworking Industry and Engineering design: Vol. 5 No. 1 (2016): INNOVATION IN WOODWORKING INDUSTRY AND ENGINEERING DESIGN 1/2016
Hamid R. Taghiyari, Elham Nadali, Mahdi Arabi, Reza Majidinajafabadi, APPLICATION OF NANO- AND MICRO-MATERIALS IN WOOD-BASED COMPOSITES IN IRAN , Innovation in Woodworking Industry and Engineering design: Vol. 13 No. 1 (2024): INNOVATION IN WOODWORKING INDUSTRY AND ENGINEERING DESIGN 1/2024
Z. Janjić, M. Janjić, PAULOWNIA, CHARACTERISTICS AND PERSPECTIVES OF ITS EXPLOITATION , Innovation in Woodworking Industry and Engineering design: Vol. 8 No. 2 (2019): INNOVATION IN WOODWORKING INDUSTRY AND ENGINEERING DESIGN 2/2019

1-10 of 258 Next

You may also start an advanced similarity search for this article.

Most read articles by the same author(s)