This is an outdated version published on 2026-01-30. Read the most recent version.

STUDY ON DURABILITY OF TUNGSTEN CARBIDE CUTTER HEADS

Authors

Zhivko Gochev Author
Pavlin Vitchev Author
Georgi Vukov Author

DOI:

https://doi.org/10.66211/inno.2022.1.278

Keywords:

cutter head, tool durability, tungsten carbide, linear wear, blunting radius

Abstract

Studies on the durability of tungsten carbide (TC) grooving and rebate cutter head and assessment of the quality of its sharpening have been conducted. The linear wear of the blade and the blunting radius when processing of massive coniferous wood and chipboard were studied. Recommendations were made regarding the preliminary preparation of the cutter heads and their effective operation.

Downloads

PDF

Published

2022-05-22 — Updated on 2026-01-30

Versions

2022-05-22 (2)
2026-01-30 (1)

Issue

Vol. 11 No. 1 (2022): INNOVATION IN WOODWORKING INDUSTRY AND ENGINEERING DESIGN 1/2022

Section

Woodworking Machines and Equipment

How to Cite

(1)

Gochev, Z.; Vitchev, P.; Vukov, G. STUDY ON DURABILITY OF TUNGSTEN CARBIDE CUTTER HEADS. INNO 2026, 11 (1). https://doi.org/10.66211/inno.2022.1.278.

Download Citation

Similar Articles

1-10 of 59 Next

You may also start an advanced similarity search for this article.

Most read articles by the same author(s)

Nencho Deliiski, Natalia Tumbarkova, Dimitar Angelski, Pavlin Vitchev, APPLYING THE SOFTWARE PACKAGE TABLE CURVE 2D FOR CALCULATING THE ENERGY REQUIRED FOR MELTING OF FROZEN BOUND WATER IN WOOD , Innovation in Woodworking Industry and Engineering design: Vol. 13 No. 1 (2024): INNOVATION IN WOODWORKING INDUSTRY AND ENGINEERING DESIGN 1/2024
Nencho Deliiski, Ladislav Dzurenda, Dimitar Angelski, Pavlin Vitchev, Krasimira Atanasova, INFLUENCE OF THE MOISTURE CONTENT OF FROZEN LOGS ON ENERGY REQUIRED FOR THEIR DEFROSTING IN BOILING PITS , Innovation in Woodworking Industry and Engineering design: Vol. 13 No. 1 (2024): INNOVATION IN WOODWORKING INDUSTRY AND ENGINEERING DESIGN 1/2024
Zhivko Gochev, Valentin Atanasov, RESEARCH ON THE CUTTING OF SPRUCE LOGS IN WINTER CONDITIONS WITH NARROW BAND SAW BLADES , Innovation in Woodworking Industry and Engineering design: Vol. 2 No. 2 (2013): INNOVATION IN WOODWORKING INDUSTRY AND ENGINEERING DESIGN 2/2013
Nencho Deliiski, Neno Trichkov, Dimitar Angelski, Ladislav Dzurenda, Zhivko Gochev, Natalia Tumbarkova, COMPUTATION OF THE AVERAGE MASS THERMAL CONDUCTIVITY OF OAK FURNITURE ELEMENTS SUBJECTED TO CONVECTIVE HEATING BEFORE LACQUERING , Innovation in Woodworking Industry and Engineering design: Vol. 9 No. 1 (2020): INNOVATION IN WOODWORKING INDUSTRY AND ENGINEERING DESIGN 1/2020
Nencho Deliiski, Natalia Tumbarkova, Dimitar Angelski, Pavlin Vitchev, COMPUTING THE AVERAGE MOISTURE CONTENT OF WOOD MATERIALS SUBJECTED TO STEAMING IN AN AUTOCLAVE , Innovation in Woodworking Industry and Engineering design: Vol. 11 No. 2 (2022): INNOVATION IN WOODWORKING INDUSTRY AND ENGINEERING DESIGN 2/2022
Aleksandar Doichinov, Pavlin Vitchev, EVALUATION OF THE MACHINED SURFACE QUALITY OF SCOTS PINE (PINUS SYLVESTRIS L.) WOOD SPECIMENS, DEPENDING ON THE CUTTING MODE OF A CNC MACHINE , Innovation in Woodworking Industry and Engineering design: Vol. 13 No. 2 (2024): INNOVATION IN WOODWORKING INDUSTRY AND ENGINEERING DESIGN 2/2024
Georgi Vukov, Valentin Slavov, Pavlin Vichev, Zhivko Gochev, FORCED SPATIAL VIBRATIONS OF A WOOD SHAPER CAUSED BY THE WEAR OF THE CUTTING TOOL , Innovation in Woodworking Industry and Engineering design: Vol. 10 No. 2 (2021): INNOVATION IN WOODWORKING INDUSTRY AND ENGINEERING DESIGN 2/2021
Nencho Deliiski, Ladislav Dzurenda, Pavlin Vitchev, Dimitar Angelski, INFLUENCE OF THE INITIAL TEMPERATURE OF FROZED LOGS ON THE DURATION AND ENERGY CONSUMPTION OF REGIMES FOR THEIR DEFROSTING IN BOILING PITS , Innovation in Woodworking Industry and Engineering design: Vol. 12 No. 2 (2023): INNOVATION IN WOODWORKING INDUSTRY AND ENGINEERING DESIGN 2/2023
Nencho Deliiski, Neno Trichkov, Dimitar Angelski, Ladislav Dzurenda, Zhivko Gochev, Natalia Tumbarkova, COMPUTATION OF THE ENERGY CONSUMPTION FOR WARMING UP OF FLAT OAK DETAILS BEFORE THEIR BENDING , Innovation in Woodworking Industry and Engineering design: Vol. 7 No. 2 (2018): INNOVATION IN WOODWORKING INDUSTRY AND ENGINEERING DESIGN 2/2018
Nencho Deliiski, Neno Trichkov, Zhivko Gochev, Dimitar Angelski, TRANSFORMATION OF TWO MUTUALLY CONNECTED MODELS FOR CONVECTIVE HEATING OF WOOD DETAILS BEFORE THEIR LACQUERING IN A FORM, SUITABLE FOR PROGRAMMING , Innovation in Woodworking Industry and Engineering design: Vol. 6 No. 1 (2017): INNOVATION IN WOODWORKING INDUSTRY AND ENGINEERING DESIGN 1/2017

1 2 3 4 > >>